Run Circles Inside the Rest.

High steering angles and a tight turning radius allow tight corners to be turned in one movement without the need for three-point turns. This decreases cycle times and gets the job done faster.

• Rated Operating Capacity
• Standard Bucket (kg): 4564 lbs. (2070)
• 48" Pallet Forks (kg): 3997 lbs. (1375)
• Net Power (kW): 78 hp (58) @ rpm
• Turning Radius - Tires (mm): 9'4” (2850)
• Overall Height (mm): 8'10” (2700)
• Overall Length (mm): 19'0” (5800)
• Click here for complete specs>>

STANDARD EQUIPMENT

• Air Filter Safety Element
• Automatic 45% Locking Front and Rear Differential
• Auxiliary Circuit for Quick Hitch and Hydraulic Implements
• Backup Warning System
• Cab air-conditioning and heater with 3-speed fan and defroster vents
• Cup Holder
• Dual Rear View Windows
• Float Position Valve
• Forward-Reverse Joystick Control
• Front and Rear Windshield Wiper/Washer System
• Front and Rear Integrated Turn Signals
• Hydrostatic Drive
• Joystick Hydraulic Quick Hitch Control
• Low and Wide Cab Entry
• One-piece chassis for stability
• Tilt-out 180° Hinged Window
• Two Front Headlights and One Rear Work Light
• Vibration-Insulated Cab with Large 180°Hinged Door

AWS46 SPECIFICATIONS

	AWS46
DIMENSIONS
Overall Height (mm)	8'10" (2700)
Overall Length (mm)	19'0" (5800)
Overall Width (mm)	6'5" (1950)
Ground Clearance (mm)	15" (375)
Wheelbase (mm)	7'0" (2150)
Center of Front Axle to Bucket Edge (mm)	7'1" (2170)
Center of Rear Axle to End of Machine (mm)	4'10" (1480)
Pin Height (mm)	11'6" (3500)
Turning Radius
Tires (mm)	9'4" (2850)
Track Circle (mm)	8'8" (2650)
Bucket (mm)	13'4" (4050)
Operating Weight (kg)	13,007 lbs. (5900)
ENGINE
Make	Deutz
Model	TD 2011 L04 W Turbo
Type/Cylinders	Water-Cooled / 4
Gross Power (kW)	82 hp (61)
Net Power (kW) @ rpm	78 hp (58)
Maximum Torque (Nm) @ rpm	199 ft.-lbs. (270)
Displacement (cc)	221 cu.in. (3620)
POWER TRAIN
Drive Pump Design	Continuously Variable Hydrostatic Axial-Piston
Maximum Travel Speed (km/h)	12.4 mph (20)
Axles	Planetary Steering
Differential Lock Percent	45/45, automatic
Total Axle Oscillation Angle	22°
PERFORMANCE
Maximum Bucket Capacity (m³)	2.35 cu.yd. (1.80)
Tipping Load
Standard Bucket (kg)	9127 lbs. (4140)
48" Pallet Forks (kg)	7992 lbs. (3625)
Rated Operating Capacity
Standard Bucket (kg)	4564 lbs. (2070)
48" Pallet Forks (kg)	3997 lbs. (1375)
Dump Height (mm)	8'11" (2720)
Dump Reach (mm)	2'2" (660)
Scraping Depth (mm)	1.6" (40)
Bucket Roll Back / Dump Angle	50° / 45°
Breakout Force- tilt (kN)	10,971 lbf (48)
Breakout Force - lift (kN)	9667 lbf (43)
HYDRAULICS
Pump Design	Gear
Flow Rate (L/min)	22.2 gpm (84)
Maximum Pressure (bar)	3046 psi (210)
Filter	Return Suction
Fuel Capacity (L)	15.9 gal. (60)
Hydraulic Oil Reservoir Capacity (L)	13.2 gal. (50)
Hydraulic System Capacity (L)	19.8 gal. (75)
SOUND LEVELS
Sound Pressure - Cab	78 dB(A)
Sound Power	99.8 dB(A)